World Power PlantsWorld Power Plants

Thermal power station Myakinino30 MW Gas

Gas

Thermal power station Myakinino is a 30 MW gas-fired power plant in Russia, operated by ZAO NATEK Invest-Energo since its commissioning. Ranked #235 of 299 gas plants in Russia, this facility contributes 0.02% of the country's total gas capacity of 139,541 MW. The largest gas plant in Russia is Surgutskaya GRES-2 at 8,865 MW, making Myakinino 295 times smaller. Nearby plants within 50 km include CHP-23 (5,690 MW, Gas), CHP-21 (1,800 MW, Gas), and CHP-22 (1,310 MW, Coal). The plant is located in the Moscow region, approximately 25 km from Moscow city center.

Capacity
30 MW
Commissioning Year
2015

11 years old

Owner
ZAO NATEK Invest-Energo
Location
55.8124°, 37.3858°

Russia, Europe

Location

Coordinates:: 55.812400, 37.385800
Open in Google Maps
Carbon Footprint490 g CO₂/kWh
Annual CO₂
57.9 Kt
118 GWh/year × 490 g/kWh
Cumulative CO₂
637.4 Kt
Over 11 years of operation
Est. Retirement
2045
19 years remaining
Annual emissions equivalent to
12.6K
cars per year
7.7K
homes per year
2.6M
trees to offset

Estimates based on Gas emission factor (490 g CO₂/kWh) and capacity factor (45%). Actual emissions may vary based on operating conditions, efficiency, and fuel quality.

Technical Details

Primary Fuel Type
Gas
Energy Source
Non-Renewable
Country
Russia
Continent
Europe
Data Source
Global Power Plant Database

RussiaEnergy Profile

652
Total Plants
311.6 GW
Total Capacity
GasNuclearCoalHydro
Top Fuels

Gas Power Generation: An Overview of Its Mechanisms, Benefits, and Future Prospects

Gas power generation is a significant component of the global energy landscape, characterized by the use of natural gas to produce electricity. This process typically involves either gas turbines or combined cycle gas plants. In a gas turbine, compressed air is mixed with natural gas and ignited, producing high-temperature exhaust gases that spin a turbine connected to a generator. Combined cycle plants enhance efficiency by utilizing both gas and steam turbines. After the gas turbine generates electricity, the waste heat is used to produce steam, which drives a steam turbine, thereby maximizing energy extraction from the fuel.

See Incorrect or Missing Data?

Help us improve our database by reporting any corrections or updates. Your contribution helps keep our global power plant data accurate and up-to-date.