World Power PlantsWorld Power Plants

Charter Dura-Bar6 MW Gas

Gas

Charter Dura-Bar is a 6 MW gas-fired power plant in the United States, operated by Wells Manufacturing Co since 1992. Ranked #1589 of 1883 gas plants in the United States. Its 6 MW represents 0.001% of the United States' total gas capacity of 592,244 MW. The largest gas plant in the United States is West County Energy Center at 4,263 MW, making Charter Dura-Bar 710.5 times smaller. Nearby plants include Elgin Energy Center LLC (540 MW, Gas), Rocky Road Power LLC (415.5 MW, Gas), and Paris (WI) (381.6 MW, Gas). The facility is located in Illinois, approximately 60 km northwest of Chicago.

Capacity
6 MW
Commissioning Year
1992

34 years old

Owner
Wells Manufacturing Co
Location
42.2891°, -88.4130°

United States of America, North America

Location

Coordinates:: 42.289100, -88.413000
Open in Google Maps
Carbon Footprint490 g CO₂/kWh
Annual CO₂
11.6 Kt
24 GWh/year × 490 g/kWh
Cumulative CO₂
394.0 Kt
Over 34 years of operation
Past Retirement
2022
4 years past expected retirement
Annual emissions equivalent to
2.5K
cars per year
1.5K
homes per year
526.8K
trees to offset

Estimates based on Gas emission factor (490 g CO₂/kWh) and capacity factor (45%). Actual emissions may vary based on operating conditions, efficiency, and fuel quality.

Technical Details

Primary Fuel Type
Gas
Energy Source
Non-Renewable
Country
United States of America
Continent
North America
Data Source
Global Power Plant Database

United States of AmericaEnergy Profile

10,047
Total Plants
1386.4 GW
Total Capacity
GasCoalNuclearHydro
Top Fuels

Gas Power Generation: An Overview of Its Mechanisms, Benefits, and Future Prospects

Gas power generation is a significant component of the global energy landscape, characterized by the use of natural gas to produce electricity. This process typically involves either gas turbines or combined cycle gas plants. In a gas turbine, compressed air is mixed with natural gas and ignited, producing high-temperature exhaust gases that spin a turbine connected to a generator. Combined cycle plants enhance efficiency by utilizing both gas and steam turbines. After the gas turbine generates electricity, the waste heat is used to produce steam, which drives a steam turbine, thereby maximizing energy extraction from the fuel.

See Incorrect or Missing Data?

Help us improve our database by reporting any corrections or updates. Your contribution helps keep our global power plant data accurate and up-to-date.