World Power PlantsWorld Power Plants

Sepangar Bay Power Plant100 MW Gas

Gas

Sepangar Bay Power Plant is a 100 MW gas-fired power plant in Malaysia, operated by an undisclosed entity. It contributes 0.24% of Malaysia's total gas capacity of 41,698 MW. The plant is ranked #54 of 58 gas plants in the country. This facility's 100 MW represents a small fraction of Malaysia's gas capacity. The largest gas plant in Malaysia is Kapar Energy Ventures (KEV) at 2,420 MW, making Sepangar Bay 24.2 times smaller. Nearby plants within 50 km include Kimanis Power Plant (285 MW, Gas), Ranhill Powertron (190 MW, Gas), and Teluk Salut Power Plant (190 MW, Gas). The plant is located in Sabah, approximately 6 km from Kota Kinabalu.

Capacity
100 MW
Commissioning Year
2018

8 years old

Owner
Sabah Electricity Sdn Bhd
Location
6.0914°, 116.1660°

Malaysia, Asia

Location

Coordinates:: 6.091365, 116.166028
Open in Google Maps
Carbon Footprint490 g CO₂/kWh
Annual CO₂
193.2 Kt
394 GWh/year × 490 g/kWh
Cumulative CO₂
1.55 Mt
Over 8 years of operation
Est. Retirement
2048
22 years remaining
Annual emissions equivalent to
42.0K
cars per year
25.8K
homes per year
8.8M
trees to offset

Estimates based on Gas emission factor (490 g CO₂/kWh) and capacity factor (45%). Actual emissions may vary based on operating conditions, efficiency, and fuel quality.

Technical Details

Primary Fuel Type
Gas
Energy Source
Non-Renewable
Country
Malaysia
Continent
Asia
Data Source
Global Power Plant Database

MalaysiaEnergy Profile

157
Total Plants
79.6 GW
Total Capacity
GasCoalHydroSolar
Top Fuels

Gas Power Generation: An Overview of Its Mechanisms, Benefits, and Future Prospects

Gas power generation is a significant component of the global energy landscape, characterized by the use of natural gas to produce electricity. This process typically involves either gas turbines or combined cycle gas plants. In a gas turbine, compressed air is mixed with natural gas and ignited, producing high-temperature exhaust gases that spin a turbine connected to a generator. Combined cycle plants enhance efficiency by utilizing both gas and steam turbines. After the gas turbine generates electricity, the waste heat is used to produce steam, which drives a steam turbine, thereby maximizing energy extraction from the fuel.

See Incorrect or Missing Data?

Help us improve our database by reporting any corrections or updates. Your contribution helps keep our global power plant data accurate and up-to-date.