World Power PlantsWorld Power Plants

El Alto (El Kenko) Power Plant Bolivia80.42 MW Gas

Gas

El Alto (El Kenko) Power Plant is an 80.42 MW gas-fired facility in Bolivia, operated since its commissioning. Ranked #6 of 9 gas plants in Bolivia, it accounts for 7.63% of the country's total gas capacity of 1,053 MW. The largest gas plant in Bolivia is Guaracachi CCGT Power Plant at 350 MW, making El Alto 4.4 times smaller. Nearby plants within 50 km include Yanacachi Norte (51.1 MW, Hydro), Chojlla (38.4 MW, Hydro), and Cutichucho (24 MW, Hydro). The facility is located near La Paz, approximately 20 km southeast of the city center.

Capacity
80.42 MW
Commissioning Year
2015

11 years old

Owner
Electrobol
Location
-16.5653°, -68.1811°

Bolivia, South America

Location

Coordinates:: -16.565300, -68.181100
Open in Google Maps
Carbon Footprint490 g CO₂/kWh
Annual CO₂
155.3 Kt
317 GWh/year × 490 g/kWh
Cumulative CO₂
1.71 Mt
Over 11 years of operation
Est. Retirement
2045
19 years remaining
Annual emissions equivalent to
33.8K
cars per year
20.7K
homes per year
7.1M
trees to offset

Estimates based on Gas emission factor (490 g CO₂/kWh) and capacity factor (45%). Actual emissions may vary based on operating conditions, efficiency, and fuel quality.

Technical Details

Primary Fuel Type
Gas
Energy Source
Non-Renewable
Country
Bolivia
Continent
South America
Data Source
Global Power Plant Database

BoliviaEnergy Profile

26
Total Plants
1.6 GW
Total Capacity
GasHydroSolar
Top Fuels

Gas Power Generation: An Overview of Its Mechanisms, Benefits, and Future Prospects

Gas power generation is a significant component of the global energy landscape, characterized by the use of natural gas to produce electricity. This process typically involves either gas turbines or combined cycle gas plants. In a gas turbine, compressed air is mixed with natural gas and ignited, producing high-temperature exhaust gases that spin a turbine connected to a generator. Combined cycle plants enhance efficiency by utilizing both gas and steam turbines. After the gas turbine generates electricity, the waste heat is used to produce steam, which drives a steam turbine, thereby maximizing energy extraction from the fuel.

See Incorrect or Missing Data?

Help us improve our database by reporting any corrections or updates. Your contribution helps keep our global power plant data accurate and up-to-date.