World Power PlantsWorld Power Plants

Broken Hill50 MW Gas

Gas

Broken Hill is a 50 MW gas power plant in Australia, operated by Essential Energy. It contributes to the country's energy mix with fossil fuels. Ranked #103 of 175 gas plants in Australia, Broken Hill's 50 MW represents 0.18% of Australia's total gas capacity of 28,163 MW. The largest gas plant in Australia is Tomago Aluminium Smelter at 810 MW, making Broken Hill 16.2 times smaller. Nearby plants within 50 km include Broken Hill Solar Plant (Solar, 53 MW) and Broken Hill STS Power Plant (Unknown, 0 MW). The facility is located in New South Wales, approximately 1,100 km west of Sydney.

Capacity
50 MW
Commissioning Year
2019

7 years old

Owner
Essential Energy
Location
-31.9863°, 141.4203°

Australia, Oceania

Location

Coordinates:: -31.986300, 141.420300
Open in Google Maps
Carbon Footprint490 g CO₂/kWh
Annual CO₂
96.6 Kt
197 GWh/year × 490 g/kWh
Cumulative CO₂
676.1 Kt
Over 7 years of operation
Est. Retirement
2049
23 years remaining
Annual emissions equivalent to
21.0K
cars per year
12.9K
homes per year
4.4M
trees to offset

Estimates based on Gas emission factor (490 g CO₂/kWh) and capacity factor (45%). Actual emissions may vary based on operating conditions, efficiency, and fuel quality.

Technical Details

Primary Fuel Type
Gas
Energy Source
Non-Renewable
Country
Australia
Continent
Oceania
Data Source
Global Power Plant Database

AustraliaEnergy Profile

678
Total Plants
156.6 GW
Total Capacity
SolarCoalGasHydro
Top Fuels

Gas Power Generation: An Overview of Its Mechanisms, Benefits, and Future Prospects

Gas power generation is a significant component of the global energy landscape, characterized by the use of natural gas to produce electricity. This process typically involves either gas turbines or combined cycle gas plants. In a gas turbine, compressed air is mixed with natural gas and ignited, producing high-temperature exhaust gases that spin a turbine connected to a generator. Combined cycle plants enhance efficiency by utilizing both gas and steam turbines. After the gas turbine generates electricity, the waste heat is used to produce steam, which drives a steam turbine, thereby maximizing energy extraction from the fuel.

See Incorrect or Missing Data?

Help us improve our database by reporting any corrections or updates. Your contribution helps keep our global power plant data accurate and up-to-date.