World Power PlantsWorld Power Plants

GENERACION FRIAS SA60 MW Gas

Gas

GENERACION FRIAS SA is a 60 MW gas-fired power plant in Argentina, operated by GENERACIÓN FRÍAS SA. Commissioned in 2015, it adds to the country's gas generation capacity. Ranked #53 of 82 gas plants in Argentina, this plant's 60 MW accounts for 0.25% of Argentina's total gas capacity of 23,690 MW. The largest gas plant in Argentina is Costanera power station at 2,324 MW, making GENERACION FRIAS SA 38.7 times smaller. There are no nearby plants within 50 km, indicating its isolated location. The facility is situated in the province of San Juan, approximately 200 km northeast of Mendoza.

Capacity
60 MW
Commissioning Year
2015

11 years old

Owner
GENERACIÓN FRÍAS SA
Location
-28.6072°, -65.1228°

Argentina, South America

Location

Coordinates:: -28.607200, -65.122800
Open in Google Maps
Carbon Footprint490 g CO₂/kWh
Annual CO₂
115.9 Kt
237 GWh/year × 490 g/kWh
Cumulative CO₂
1.27 Mt
Over 11 years of operation
Est. Retirement
2045
19 years remaining
Annual emissions equivalent to
25.2K
cars per year
15.5K
homes per year
5.3M
trees to offset

Estimates based on Gas emission factor (490 g CO₂/kWh) and capacity factor (45%). Actual emissions may vary based on operating conditions, efficiency, and fuel quality.

Technical Details

Primary Fuel Type
Gas
Energy Source
Non-Renewable
Country
Argentina
Continent
South America
Data Source
Global Power Plant Database

ArgentinaEnergy Profile

368
Total Plants
70.2 GW
Total Capacity
HydroGasCoalNuclear
Top Fuels

Gas Power Generation: An Overview of Its Mechanisms, Benefits, and Future Prospects

Gas power generation is a significant component of the global energy landscape, characterized by the use of natural gas to produce electricity. This process typically involves either gas turbines or combined cycle gas plants. In a gas turbine, compressed air is mixed with natural gas and ignited, producing high-temperature exhaust gases that spin a turbine connected to a generator. Combined cycle plants enhance efficiency by utilizing both gas and steam turbines. After the gas turbine generates electricity, the waste heat is used to produce steam, which drives a steam turbine, thereby maximizing energy extraction from the fuel.

See Incorrect or Missing Data?

Help us improve our database by reporting any corrections or updates. Your contribution helps keep our global power plant data accurate and up-to-date.